HOME - PRODUCT - ORE DRESSING EQUIPMENT - text
Flotation machine
The mineral flotation machine is applicable for separating non-ferrous metal, such as copper, lead, zinc, nickel and molybdenum, the black metal and non-metal mineral which are subject to coarse separation, fine separation and reverse flotation.
We're here to help:
Easy ways to get the answers you need.
Product Description


 

Flotation Machine can be used to separate nonferrous metal, ferrous metal, heavy metal, nonmetallic mine, chemical material such as gold, copper and recycling minerals. Each chute can inhale gas, sink magma, separate. No assiting equipments are required,and Flotation Machine must be levelly installed. Flotation Machine is easy to change the flow chart. The cycling way of magma is very reasonable. Flotation Machine can reduce the impurities to a great extent. There is automatic equipment on the magma surface, easy to adjust. The impeller also owns the upper and lower retroversion blade. The upper one makes the magma cycle upward, while the lower one makes the magma cycle downward.

 

Working principle of Flotation machine

The impellers are driven through V belt transmission, which brings centrifugal effect to form the negative pressure. On the one hand, the flotation machine inhales sufficient air to mix with ore slurry; on the other hand it stirs ore slurry and mix with medication to form the mineralized froth. To adjust the height of flashboard to control the liquid level and make the useful froth scraped by loam board. Each chute can inhale gas, sink magma, separate. No assisting equipments are required, and it must be levelly installed. It is easy to change the flow chart. The cycling way of magma is very reasonable. It can reduce the impurities to a great extent. There is automatic equipment on the magma surface, easy to adjust. The impeller also owns the upper and lower retroversion blade. The upper one makes the magma cycle upward, while the lower one makes the magma cycle downward.

 

Main technical parameter:

Model

XJK-0.33A

XJK-0.62(4A)

XJK-1.1(5A)

XJK-2.8(6A)

XJK-5.8(7A)

Effective volume(m³)

0.35

0.62

1.1

2.8

5.8

capacity(m³/min)

0.18—0.4

0.3-0.9

0.6-1.6

1.5-3.5

3-7

Rotation Speed (r/min)

470

400

330

280

240

Blade diameter(mm)

300

350

500

600

750

Blade motor (kw)

1.5

3

5.5

11

2230

Scraping platemotor (kw)

1.1

1.1

1.1

1.1

1.5

Single trough weight (t)

430

860

1380

2330

3533